CasaDelGato - Images from the House of the Cat

Home > Electric Vehicle > Ford F250 EV Conversion

Last additions - Ford F250 EV Conversion
DecalsOnBack.jpg
Decals on back5192 viewsI finally got the Decals on the truck.
Hopefully I'll get some good pictures of the ones on the sides as well.
Apr 18, 2010
2009-05-28_10-33-58.JPG
DC cabling6548 viewsThis shows the DC power cableing done - except for the battery boxes themselves.May 29, 2009
2009-05-28_14-54-12.JPG
Gauges6509 viewsI've mounted 4 gauges on the dash.
Charge Current, Pack Voltage, Battery Current, Motor Current.
May 29, 2009
2009-05-28_10-32-32.JPG
Truck wiring AC conduit4775 viewsThe conduit for the AC wiring under the truck.May 29, 2009
2009-05-28_10-32-08.JPG
Truck wiring conduit5085 viewsSome of the DC conduit runs under the truck.May 29, 2009
2009-05-28_10-28-00.JPG
Cables into bed6661 viewsThis shows how I mounted and protected the cables that run from the front of the truck into the bed.
All under-truck cables are in some kind of conduit, or have a shield between them and the ground.
May 29, 2009
2009-05-22_13-29-50.JPG
Breaker Boxes4653 viewsThe black box on the left has 3 Airpax 250A DC breakers. These will have a bar bolted to their handles so they all switch together.
The other box has the 2 breakers for the charging system.
May 29, 2009
2009-05-18_17-44-44.JPG
Rear Battery box in truck6151 viewsThis is the rear Battery Box that will hold 42 Golf Cart batteries in the bed of the truck.
(Someday when hitech batteries are reasonably priced, I'll remove this and mount the pack under the bed.)
May 29, 2009
2009-05-16_17-40-06.JPG
Front battery box in truck4312 viewsThis is the front Battery Box that will hold 6 Golf Cart batteries under the hood.May 29, 2009
2009-05-13_16-51-32.JPG
Ceramic Heater4478 viewsThis shows where it all mounts behind the glove box.
May 15, 2009
2009-05-13_16-51-22.JPG
Ceramic Heater5842 viewsThis is a 1500W Ceramic Heater mounted where the old Heater core was.
I kept the original overheat switch from the ceramic heater, and added another (at the top) just to be paranoid.
Since I'll be powering it from a 288V pack, I only need to use the center and outer connectors to the core.
May 15, 2009
2009-04-08_09-31-40.JPG
Old Heater Core5202 viewsI was really surprised at how easy it was to get the old heater core out of the truck.
Just pop out the glovebox, and remove the panel behind it.
That uncovers the core.
May 15, 2009
118 files on 10 page(s) 1