CasaDelGato - Images from the House of the Cat

Home > Electric Vehicle > Ford F250 EV Conversion > Install Motors

2009-02-14_12-53-28.JPG
Position motors10464 viewsMotors were mounted to the transmission, then lifted in from below.
Transmission was then bolted to it's mounts, and the motors placed on blocks to keep everything in position
2009-02-15_17-09-34.JPG
Building Motor Mounting Framework9511 viewsWe decided it was easiest to juts build the motor mounting framework in place. Carefully cut pieces and clamp them in place, then tack weld it all together.
2009-02-17_13-13-58.JPG
Completed Motor Mount7774 viewsThis is the motor mounting framework, after all the welding was complete.

2009-02-17_15-54-18.JPG
Painted Motor Mount7969 viewsI then sandblasted it all ,and painted it.
2009-02-21_10-56-04.JPG
3194 views
2009-02-21_13-48-38.JPG
Motors Installed8864 viewsEverything is in and bolted down. The framework is mounted to the original rubber engine mounts that used to support the 460cui Gas Engine.
2009-04-29_16-09-38.JPG
Motors Wired4246 viewsI wired the motors to the Z2K using 4/0 cable.
Notice that I don't like exposed High Voltage connections. Couldn't do much about the 1000A shunt though.
 
7 files on 1 page(s)