3103 views2 Dividers and front/back panels added.
|
|
Motor Cooling blower3092 viewsThis is the ductwork box I had to build so I can run a hose to each motor.
The box is built out of 3/16" ABS. The blue plate is a metal mounting plate so I can bolt the assembly to the frame.
|
|
Motor-Motor mount finished3084 viewsPainted all pretty
|
|
3031 viewsShows were the 6 rows and 2 dividers will be.
|
|
Cooling it all off2995 viewsCooling the coupler down to keep the bearings from getting cooked.
|
|
2887 views
|
|
1st half coupler on motor2858 viewsMounted 1/2 the coupler on the first motor.
|
|
Blower Mounted2812 viewsAt the back left you can see where the Blower has been mounted. It blows down into the box I built, and there is a 3" flex tube running to the shroud on each motor.
|
|
2790 views
|
|
2773 views
|
|
Getting the coupler parts off2764 viewsThen we had to mount each of the motors in the lathe and cut the remaining parts of the coupler off the motor shafts. Being VERY careful to not nick or damage the motor shafts.
|
|
Zilla Mounted2750 viewsA closer view of the Z2K mount
|
|
118 files on 10 page(s) |
|
|
|
|
|
7 | |
|
|