CasaDelGato - Images from the House of the Cat

Home > Electric Vehicle > Ford F250 EV Conversion > Install Motors

Most viewed - Install Motors
2009-02-14_12-53-28.JPG
Position motors10192 viewsMotors were mounted to the transmission, then lifted in from below.
Transmission was then bolted to it's mounts, and the motors placed on blocks to keep everything in position
2009-02-15_17-09-34.JPG
Building Motor Mounting Framework9239 viewsWe decided it was easiest to juts build the motor mounting framework in place. Carefully cut pieces and clamp them in place, then tack weld it all together.
2009-02-21_13-48-38.JPG
Motors Installed8640 viewsEverything is in and bolted down. The framework is mounted to the original rubber engine mounts that used to support the 460cui Gas Engine.
2009-02-17_15-54-18.JPG
Painted Motor Mount7756 viewsI then sandblasted it all ,and painted it.
2009-02-17_13-13-58.JPG
Completed Motor Mount7562 viewsThis is the motor mounting framework, after all the welding was complete.

2009-04-29_16-09-38.JPG
Motors Wired4200 viewsI wired the motors to the Z2K using 4/0 cable.
Notice that I don't like exposed High Voltage connections. Couldn't do much about the 1000A shunt though.
2009-02-21_10-56-04.JPG
3146 views
 
7 files on 1 page(s)