Motor Shroud for Blower5340 viewsThis is the shroud I wrap around each motor (Brush end) to connect the ductwork from the blower.
It's made out of 4" wide aluminum flashing. Just cut with a carpet knife, and flex the cuts apart.
|
|
Blower to cool the motors4694 viewsThis is a 3 speed 12V blower I got from Surplus center.
I plan on having it come on in low speed whenever I turn the truck on, and it will switch to hi-speed if any of the motor thermostats trigger.
|
|
Motor Cooling blower3098 viewsThis is the ductwork box I had to build so I can run a hose to each motor.
The box is built out of 3/16" ABS. The blue plate is a metal mounting plate so I can bolt the assembly to the frame.
|
|
Blower Mounted2818 viewsAt the back left you can see where the Blower has been mounted. It blows down into the box I built, and there is a 3" flex tube running to the shroud on each motor.
|
|
|
|
