Shop Back wall4000 viewsA view from the end of the office along the back wall of the shop.
Thats a Panel Saw just on the other side of the motorcycle.
And that BIG shelving is all Pallet Racking. (Like the use at Home Depot)
|
|
Shop2485 viewsEnd view of my 3 rows, 18' long, 12' tall, pallet racking
(Another 18' row along the far end wall as well.)
|
|
Shop Pallet Racking2219 views
|
|
Shop Pallet Racking2483 viewsThis is a view along the end wall pallet racking. I use a double layer of it in the corner as a lumber rack.
|
|
RPM sensor4674 viewsThis shows how I mounted the Z2K RPM sensor to the tailshaft of the motor.
|
|
Mechanical link between Breakers3735 viewsThis shows how I made it so that only 1 of the 2 power inlet breakers can be ON at a time.
Both can be off, but only 1 can be ON.
|
|
Rear Battery box in truck6150 viewsThis is the rear Battery Box that will hold 42 Golf Cart batteries in the bed of the truck.
(Someday when hitech batteries are reasonably priced, I'll remove this and mount the pack under the bed.)
|
|
The Controller compartment5814 viewsThis is the Controller comparrtment for Firefly.
I think that's a Kilovac controller
|
|
AC Power Schematic3586 viewsThis is the schematic for the AC inlet power.
There are both 120V (standard 20A plug) and 240V (CS6375) AC power inlets.
Each has a separate breaker, and only 1 breaker can be ON at a time due to a mechanical interlock.
|
|
Pack Voltage System Schematic5875 viewsThis is the schematic for the Hi Voltage DC System.
It includes everything that connects to the pack.
I've left out a few of the hairball connections (like tach and tach sensor) that don't connect to anything else.
(Done with EagleCAD)
|
|
|
|
|
|
