Control Wring (part 2)4075 viewsThis is what's under the top board of the control wiring. This is where most of the big parts are located.
PFC-50 plugs, DC-DC converters, fuses for pack voltage accessories, etc...
|
|
Motor wiring, Series5118 viewsAfter discussing things with several people, I decided to wire the motors in series.
This is because I have a fairly hi voltage page, and should be able to get enough RPM's even with the motors in series.
Also gives much better torque.
|
|
Decals on back5153 viewsI finally got the Decals on the truck.
Hopefully I'll get some good pictures of the ones on the sides as well.
|
|
12V System Power Schematic5120 viewsThis is the schematic for the 12V System only. (Blowers, pumps, etc...)
(Done with EagleCAD)
|
|
AC Power Schematic3582 viewsThis is the schematic for the AC inlet power.
There are both 120V (standard 20A plug) and 240V (CS6375) AC power inlets.
Each has a separate breaker, and only 1 breaker can be ON at a time due to a mechanical interlock.
|
|
Pack Voltage System Schematic5867 viewsThis is the schematic for the Hi Voltage DC System.
It includes everything that connects to the pack.
I've left out a few of the hairball connections (like tach and tach sensor) that don't connect to anything else.
(Done with EagleCAD)
|
|
|
|
|